+353(0)719143506 / +441159677807 info@verusmetrology.com 08.00 - 17.00

V-Fix Store

Outer Rail 200 - Category - Verus Metrology PartnersOuter Rail - Category - Verus Metrology PartnersInner Rail 50 - VFix 4 - Verus Metrology PartnersInner Rail 100 - VFix 4 - Verus Metrology PartnersInner Rail 150 - VFix 4 - Verus Metrology PartnersCorner Connector - VFix 4 - Verus Metrology PartnersHorizontal Pogo - VFix4 - Verus Metrology Partners
Outer Rail 200 - Category - Verus Metrology Partners
Outer Rail - Category - Verus Metrology Partners
Inner Rail 50 - VFix 4 - Verus Metrology Partners
Inner Rail 100 - VFix 4 - Verus Metrology Partners
Inner Rail 150 - VFix 4 - Verus Metrology Partners
Corner Connector - VFix 4 - Verus Metrology Partners
Horizontal Pogo - VFix4 - Verus Metrology Partners

Basic Kit 2015

2,140.00

The V-FIX Basic Kit 2015 allows users to achieve a highly-efficient metrology inspection process with capabilities to suit any inspection machine type. It gives users the ability to measure multiple parts at once, simplifying the overall metrology process.

SKU: 4-2015 Categories:,

Product Description

Compatible with any measurement machine type, V-FIX Basic Kit 2015 is an innovative metrology inspection solution designed by Verus to simplify client’s measurement processes. Users of the kit will have the ability to build a fixture of any size that will securely hold complex components in place throughout inspection.  

V-FIX 2015 enables clients to improve their metrology machines efficiencies thus accelerating their measurement process. The kit allows for fast, interchangeable, pre-assembled holding solutions with users having the ability to build multiple modules offline and drop them into the V-FIX frame as and when needed. This means a frame suitable for their measuring machine stage size and window capacity can be constructed by an engineer in minutes, saving much needed time and resources.

Securing the component in place, V-FIX 2015 has sectioning capabilities, allowing users to divide the frame so that multiple parts can be measured at once. The kit allows for different height variants to be achieved, therefore lowering the level of height restrictions that can often become a challenge during the metrology process, while allowing for measurements to be taken from multiple orientations. As V-FIX is made using non-abrasive materials, the kit removes the risk of component interference, safeguarding its purpose and ensuring all measurement results remain non-distorted.

Additional information

Weight 2000 g
Dimensions 460 × 410 × 130 mm
Materials

Black Hard Anodised Aluminium, Stainless Steel and Black Peek