Mark Devanney Promoted to Design Manager

March 12, 2020

Mark Devanney Promoted to Design Manager

March 12, 2020

Share:

Mark Promotion Design Manager

Verus Metrology Partners is pleased to announce Mark Devanney ‘s new position within the company as lead Design Manager.

An Integral Part of the Verus Family

A passionate and extremely talented Design Engineer, Mark’s experience with the art of design spans over 14 years. Therefore, having spent ten of those years with Verus, he has become an important part of the Verus Metrology family.

As part of the Fixture Design team, Mark works closely with some of our largest clients, creating technical drawings that result in high-end precision fixtures.

Taking an innovative approach to measurement challenges, Mark’s role is to utilise complete design optimisation to produce world-class metrology solutions.

Therefore, fundamental to Verus’ expert design team, Mark’s attention to detail and the level of pride in his work has allowed Verus to evolve their design process, leading to the superior inspection fixtures produced today. His focus on creating a team-orientated and shared-learning environment has made him the perfect fit for the managerial role.


Newly Appointed Design Manager

Furthermore, the newly appointed Design Manager will take responsibility for guiding all DQ’s with clients, reviewing all final designs and maintaining our expert-level of design quality.

Mark Devanney Promotion

He will also take on the task of implementing new design techniques when needed while continuing with internal team development.

Speaking ahead of the commencement of his new role, Mark says:

I am delighted to be taking on this new challenge and I’m looking forward to working closely with my team. I’d also like to thank all at Verus for giving me this great opportunity and hope that the next 10 years are as good as the first.

Discussing Mark’s promotion at Verus Metrology, Verus CEO Andrew Hodson explains:

Mark has been an integral part of the company from the very start of Verus Metrology. Marks involvement and influence has not just been in the area of world-class metrology fixture design, but also in shaping the company brand and ethos. Hence, he is an essential part of the customer-focused service Verus has become world-renowned for.

Congratulations Mark on your new promotion. We look forward to working with you as part of the Verus Management Team.


To find out more about Verus’ bespoke Metrology Fixtures contact Mark Devanney on +353 (0)71 91 43506 (ext. 210). To request a quote click here. Moreover, subscribe to our NEWSLETTER to receive our technical blogs, customer updates and all the latest company developments.

Introduction 

As 2024 unfolds, the field of metrology is witnessing transformative changes. At Verus Metrology, we recognize the importance of keeping pace with technological advancements and new trends in the science of measurement. In this rapidly evolving landscape, innovations in metrology are not just about achieving precision; they are about meeting the evolving challenges of industries like medical devices, where accuracy is critical for ensuring safety and quality. This article explores the emerging trends and technological breakthroughs shaping metrology’s future. 

As 2024 unfolds, the field of metrology is witnessing transformative changes. At Verus Metrology, we recognize the importance of keeping pace with technological advancements and new trends in the science of measurement. In this rapidly evolving landscape, innovations in metrology are not just about achieving precision; they are about meeting the evolving challenges of industries like medical devices, where accuracy is critical for ensuring safety and quality. This article explores the emerging trends and technological breakthroughs shaping metrology’s future. 

Metrology Fixture Types – What’s Available, and Which is Best?

9 February 2023

Share:

Fixture type and use cases

Metrology fixturing technologies continue to develop at a rapid pace, offering manufacturers in the medical device industry new and innovative solutions. Those solutions don’t just meet inspection and quality process requirements, but they also deliver efficiency savings and productivity gains. How do you know what metrology fixture types are available and which is best for your application? In this blog, we’ll outline the main options, their underlying technologies, and the use cases they are best suited for. 

However, it is also important to point out that the fixture types described in this blog represent broad categories. Within those categories, there is an infinite number of ways that a fixturing solution can be developed to meet your specific needs, reduce risk, and take advantage of opportunity

While there are metrology fixture types that we can explore, every fixture solution that we develop here at Verus Metrology is completely unique. In other words, fully customised for the product or component being measured, as well as the inspection machine, quality department workflows, production processes, and any other influencing factor. 

Metrology Fixture Types 

There are six main metrology fixture types: 

  • Auto rotational 
  • Manual rotator 
  • Multi-station
  • Proof of Principle (POP) 
  • Vision system 
  • Docking station 

 

Auto-Rotational Fixtures

Isometric view of an auto rotational metrology checking fixture, the automatic part of the fixture is the turning of the rail by a motor. The fixture has white plastic components held in place using brown clips

 

At a fundamental level, the job of a metrology fixture is to hold a product or component securely in place so it can be effectively inspected and measured. However, there are situations where the inspection process requires the part to be presented at different orientations to enable all the relevant measurements to be taken. This requirement for measurement in multiple orientations is increasing as medical device products become more complex and intricate. 

Auto-rotational fixtures enable the inspection of products and components in multiple orientations with minimal operator intervention. An auto-rotational fixture can be a single-station set-up, but they more commonly come in multi-station designs to minimise the time it takes to achieve your required sample rate. 

The most important feature of an auto-rotational fixture is that you can measure multiple components in multiple orientations in a single setup. 

Manual Rotator Fixtures

Manual Rotator Metrology Fixtures by Verus Metrology

Manual rotator fixtures offer similar benefits to auto-rotational fixtures. The obvious main difference is that operators manually rotate components once they are loaded into the fixture. 

Manual rotator fixtures can be multi-station. They are also designed so that all measurements in all orientations can be taken in one set-up. So, while the operator will need to manually control the rotation mechanism, there is no requirement to touch or adjust the components as the fixture holds them securely in place during rotation. 

The benefits of manual rotator fixtures include: 

  • Significantly reduced operator intervention 
  • Improved measurement accuracy 
  • Elimination of errors 
  • Faster and more efficient metrology processes 

Furthermore, we can design your manual rotator fixture so it can be loaded with components away from your CMM. This improves CMM availability as the machine doesn’t have to sit idle while components are being loaded onto the fixture. 

Multi-Station Fixtures 

multi station rotator

According to FDA regulations and ISO 13485, it is essential that you can statistically justify sampling rates in your quality procedures using a risk-based approach. The operational part of this requirement isn’t covered in the guidelines, but it is an important business consideration. How do you efficiently, accurately, and cost-effectively inspect the number of products or components that are required to hit your sampling rate target? 

Multi-station fixtures are a common solution. We can design multi-station fixtures in any configuration. This could be a large cavity multi-station fixture, a fixture to inspect very small and complex medical devices, or solutions for products or components of any size, geometry, or characteristic. 

The benefits of multi-station fixtures include: 

  • Operator intervention is greatly reduced 
  • Fixtures only need to be loaded once before full inspection routines can take place on multiple products at the same time 
  • Reduce human error 
  • Speed up inspection processes while achieving your sampling rate target 
  • Reducing the cost of inspections 

 

Proof of Principle Multi-station Prototype Fixtures 

proof of principle

 

In many product development and process change situations, it is beneficial to have a POP fixture that can be used for verification and validation purposes. The approach we typically take at Verus Metrology is to design a multi-station fixture to deliver on your requirements. 

However, before this multi-station fixture design goes into manufacturing, we design and produce a single-station POP prototype fixture. This POP prototype can be manufactured quickly in our advanced manufacturing facility. We’ll then put it through a gage R&R study to give you confidence in its repeatability and reproducibility, before sending it to you for evaluation and testing. 

POP prototype fixtures offer a range of benefits: 

  • Facilitates design for inspection during the product development process 
  • Minimises delays in process verification 
  • Enhances and speeds up the design transfer process 
  • Reduces time to market in line with regulatory requirements 

 

Vision System Solutions

We also design and manufacture fixturing solutions for vision systems in addition to the fixtures we design for use on CMMs. Fixturing solutions that are optimised for vision systems have a number of specific and differentiating features, including ensuring there is a clean and clear view of the part. 

Vision system solutions can also allow for backlighting where necessary. Furthermore, a single set-up is all that is required for the full inspection routine to take place, with parts securely held with as little force as possible. 

 

Docking Systems 

Docking System Verus Metrolody

Docking systems enhance the efficiency of quality departments that use multiple fixtures and/or have high sampling rates. Docking systems are securely fixed to CMMs to make it quick and easy for technicians to load fixtures that are fully set up with components ready for inspection. Once the inspection routine for a fixture is complete, it can be quickly and easily removed from the docking system ready for the next fixture to be loaded. 

With a custom-designed docking system, you can have confidence that each changeover results in precisely secured fixtures for repeatable and reproduceable inspections. 

Choosing the Right Fixture for Your Requirements

There are many factors to consider when choosing the best type of metrology fixture for your requirements. Your budget is an important consideration, as are your ROI goals, quality processes, quality resources, and future requirements. 

The best approach is to speak to a fixture design expert to explore the options and get an understanding of what is possible. Contact us today to find out more. 

Text to go here..

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

About Verus Metrology Partners

Verus is committed to the enhancement of our client’s metrology laboratories, machine efficiencies, and inspection processes. Since our beginning, our expert metrology engineering team has partnered with some of the world’s largest MedTech multinationals.

 

We specialize in high quantity, difficult to measure, yet critically important, medical device parts. As well as working in the MedTech, Pharmaceutical and Personal Care industry, we also work with metrology departments in the FMCG and Aerospace industry.