Sub-Contract Metrology offering Revised at Verus

January 7, 2019

Sub-Contract Metrology offering Revised at Verus

January 7, 2019


Verus Metrology Partners- Q10 Probe

Like the technologies that underpin our business, the services we provide at Verus Metrology Partners are constantly improving and evolving.

One such service is our Sub-Contract Metrology offering. Providing a tailored inspection service, clients can access the experience, knowledge, and technology of our experts on a sub-contract basis.

Therefore, we have recently revised this service to ensure that it is of optimum value for our clients.

Sub-Contract Metrology is an aspect of our business that’s in sharp focus as our clients increasingly look for sub-contracted services. Be that Dimensional Inspection, a Validation Metrology Service, Calibration & Certification or use of our Inspection Machines.


As part of the revision of Sub-Contract Metrology, we have introduced a new pricing structure. This is based on a half-day or daily rate rather than on the number of dimensions measured.

Additionally, we have introduced price discounts on a sliding scale. This is applicable to all projects completed during each 30-day period throughout the year.

  • 5% discount will be applied on the 3rd day of each project
  • 10% discount will be applied on the 5th day of each project
  • 15% discount will be applied on the 10th day of each project


Jon Stabler, UK Metrology Applications Manager says:

The new structure is more cost-effective for our customers. We are noticing an increased need for Sub-Contract Metrology because clients don’t have the capacity to do it themselves. Perhaps a machine is down or they have an overflow of work they need to get through. Thus, our approach is to work with clients on a partnership basis, often operating as an external department for them”.

Our clients often need to get a second opinion. If they have parts from a supplier that they measure internally but believe might have an issue; they, therefore, send it to us to get an independent check-in in a lab environment by OEM-certified engineers.

Under Sub-Contract Metrology, we also do First Article Inspection Reports (FAIRs). This is where a customer wants to make a part, we measure the first article that they have created so they know it is fine to start manufacturing in bulk.

Speaking with Hazel Rooney, Metrology Manager in Ireland, she says: “One of the key advantages for a client in choosing Verus Metrology Partners for Sub-Contract Metrology is that we offer a quick turnaround with high-quality reports at a very good price”.

Our metrology services are available to customers under four headings:


We provide a tailored sub-contract inspection service where experts from the Verus metrology team can provide you with a range of specific services on a sub-contracting basis – from initial sample inspection reports (ISIR) and tool validation to measurement procedure creation and on-site metrology support.

Our experts will work with you to ensure that any project needing accurate dimensional measurements is completed within the fastest possible time. All while maintaining the highest level of quality.


Verus partners with clients to provide a full validation metrology service. This allows clients to reduce the amount of time and resources spent on this time-consuming process. Using our bespoke metrology fixtures, equipment, and software, we guarantee our client’s validation service is completed quickly and to the highest possible standard.

Therefore, we pride ourselves on providing our clients with an efficient service that guarantees confidence in the metrology data.


One of our specialties at Verus is the certification of non-standard bespoke gauges. Our experts have created a standard procedure for the inspection and testing of such gauges, developed over years of working closely with clients.

In addition, we also calibrate and certify a variety of standard gauges. We provide these services to a wide range of clients across numerous sectors. Our aim is to provide both accredited, traceable calibration and verification of both standard and non-standard gauges.


We have a wide variety of inspection machines. This enables us to provide bespoke solutions to our clients. Our inspection machines are calibrated annually and kept in a temperature-controlled environment to ensure we remain fully compliant with international standards. Furthermore, our expert engineers are OEM-certified and partake in ongoing in-house training and development programs.

At Verus Metrology Partners, we strive to provide solutions and maintain close partnerships with clients.

Find out more about the metrology services we provide by contacting Hazel Rooney, our Metrology Manager in Ireland on +353 (0)71 91 43506 (ext. 4). To request a quote click here and be sure to subscribe to our newsletter to receive our technical blogs, customer updates, and latest developments.

About Verus Metrology Partners

Verus is committed to the enhancement of our client’s metrology laboratories, machine efficiencies, and inspection processes. Since our beginning, our expert metrology engineering team has partnered with some of the world’s largest MedTech multinationals.


We specialize in high quantity, difficult to measure, yet critically important, medical device parts. As well as working in the MedTech, Pharmaceutical and Personal Care industry, we also work with metrology departments in the FMCG and Aerospace industry.